Frequently Asked Questions.
Q1: What devices are available for the A501 500W power station?
A: A501 500W power station can supply electrical power up to 500W; with a peak rate of 1000W. Please check the rate power of your device before using. If connected with devices that over 500W; the power supply will shut off and turn into protection mode; you need charge it to re-activate.
Friendly Note: For some devices with motor / compressor built inside; the instant start-up power may be 2-4 times more than the rated power; which may exceed the upper limit of the A501 500W power station. if the instantaneous power of the product exceeds 1000W; the power supply will be overloaded and cannot be used (For example, air conditioner/double door refrigerator microwave oven/oven).
Q2: How long will the A501 500W power station power my device?
A: Working time (estimation) = 540Wh* 0.85 / operating power of your device. (0.85=Conversion Rate)
Please note that the actual working time may vary under different situations.
Q3: Why does the battery lose power when not in use?
A: The unit may be in standby mode where the power supply; screen; and/or inverter could be using up to 10W. Remember to long press the power button to turn the unit completely off. If the unit loses power when completely off; try recharging it to 100% and use it to 0% two or three times to calibrate the battery.
If you feel that the battery drains fast when used for the first time; it is because the display information of the remaining power is inaccurate when the product is activated for the first time. The power remaining will automatically calibrate by discharging the battery to 1% and then recharging it to 100%.
Q4: What kind of solar panel can charge this A501 500W power station?
A: Best Companion: 1) 1*GOFORT 100W Portable Solar Panel; fully recharge from 0-100% in 9-10.5 hours. 2) 1*GOFORT 60W Portable Solar Panel; fully recharge from 0-100% in 10-13 hours.
Friendly Note: The actual charging time depends on the weather; solar condition; and the angle of the solar panels.
Q5: Will this portable power bank work for a CPAP machine?
A: The A501 500W power station can furnish strength to CPAP machines in two ways: a 110V AC plug or a 12V DC plug. Its strongly encouraged that you use a DC-DC converter when charging a CPAP machine. Turn off the heater/humidifier to prolong the strength furnish tie of the energy station. In addition; we advocate the DC-DC converter due to the fact the electricity station will ultimate longer than the usage of the AC outlet.